$250 Cash Drawing for March 2018
Any Order Qualifies to Win

Imperial Blades - Titanium Oscillating Lineup

imperial blades

Pretty intimidating blade lineup isn't it? Don't mess with these bad boys...but the good news is, they will take care of all your oscillating needs.

Order from left to right - IBOAT360 Carbide Extreme - Smashes through just about every application on earth...literally!

IBOAT340 1-3/4" - 18 TPI Wood and Metal Blade - The metal blade that cuts wood - perfect for fast jobs, versatility, and finishing work

IBOAT337 - 2-1/2" Wood w/ Nails BM - Great for wood, PVC, and cutting vinyl

IBOAT336 - 1-1/4" Wood w/ Nails BM - Perfect for door jambs and aggressive wood/metal

What is the Difference Between MM and IBOA Oscillating Blade Arbors?

What is the Difference Between MM and IBOA Oscillating Blade Arbors?

We tend to get this question a lot: MM or IBOA arbors - Which one do I order? The short answer is MM for Fein Multimasters, and IBOA for all other multi tools - Both USA Made.

The "MM" arbor was the Original Design for Oscillating Blades

It was meant to fit the Fein Multimaster just like the OEM blades would, and would ideally outperform and outlast the original manufacturers.

NOTE:  All Imperial Blades are accompanied by a no-hassle 30-day warranty. If you're not satisfied, neither are we - send them back for a full buy-back guarantee.

Now, the all-new IBOA (Imperial Blades Open Arbor) will fit 99% of the remaining multi tools on the market - there's no hassle, no reason to think about which blade you need to buy, and no need to buy different blades to fit different tools for your crew.

The IBOA oscillating blades fit nicely at different angles too - so their versatility speaks for itself. We hope that you found this short article useful.

Exception:  We still carry the SC (Supercut and Festool) arbors - these are noticeably different from most multi tool blade arbors, and will ONLY fit those multi tools. No adapters required.

Top 3 Oscillating Multi Tool Blades Options for Cutting PVC

PVC (polyvinyl chloride) is ubiquitous around a modern construction job site. Cutting this material can be a challenge without the proper tools and blades. Luckily, Imperial Blades offers excellent oscillating multi tool blades for cutting pipes and finishing your PVC jobs accurately and consistently. Many of these blades also perform well on other materials, too.

IBOA133 Deep Wood HCS Blade

High-carbon steel construction means powerful cutting speed and fine-tooth precision. This deep plunge oscillating multi tool blade from Imperial Blades has a flush-cut design for the tightest cuts in cramped corners. PVC, wood, and other tough materials are no match for the clean and consistent cut from the Deep Wood HCS Blade. This oscillating multi tool blade is one of the thinnest blades you can find, and it’s a great addition to any contractor’s kit or construction professional’s tool bag for detail work. If you want a big cutting surface, read on for more oscillating tool blades for PVC jobs.

IBOAT337 Titanium Wood w/Nails Blade

This titanium bi-metal blade from Imperial Blades is perfect for fast cuts using a multi tool. The tough saw tooth coating easily cuts through tough materials like PVC, drywall, sheet metal, and more. It’s a great oscillating blade to keep in your tool box – you never know when you’ll need it. Tough plunge cuts, tight cuts on kick plate, awkward angles, and other frustrations are made easy by this versatile blade. PVC and a variety of other materials are no match for the reliable and durable cutting edge from the TiN Wood w/Nails oscillating blade.

Imperial Blades IBOAT360 Carbide Extreme

The newest edition to the Imperial Blades oscillating lineup, this blade will literally smash through PVC, leaving a trail of dust in its path - probably the best choice for any harder material, this carbide oscillating blade is the only multi tool blade on earth that is titanium-coated for extra power.

The 7-layered titanium process is American-made, and guaranteed to last on the job.

Top 3 Oscillating Tool Blades for Drywall

Drywall is a staple in most home construction these days, and it can be a challenging material to manage. With the right oscillating multi tool blade in your pocket, the job becomes much easier. These drywall oscillating blades from Imperial Blades offer superior control, accuracy, and durability for general construction or specialized labor.

IBOA200 Fast Wood HCS Blade

IBOA300 Wood w/Nails Bi-metal Blade    

This ONE FIT oscillating blade works with nearly all multi tool anchors, and it’s made from some of the toughest material in the business. This oscillating tool blade is powerful enough to cut through framing nails, bolts, drywall, and even sheet metal. For demolition or finishing, this handy Imperial Blades product offers superior performance and durability. Bi-metal construction means you will enjoy a consistent and long-lasting cutting edge for many hours of heavy use.

IBOAT337 Titanium Wood w/Nails Blade

This oscillating blade is a great addition to your kit. One of the longest-lasting blades in the market, the TiN STORM oscillating multi tool blade is ideal for general purpose use and reliable performance. Any professional or craftsman can benefit from the powerful cutting edge and smokeless operation. Whether you need a tool for flooring, tile, drywall, or metal, this blade can get the job done. It’s high cutting speed and stepped design are perfect for awkward cuts that demand precision and skill.

Top 3 Oscillating Multi Tool Blades for Concrete Cutting

Concrete is one of the most challenging materials to cut safely, and it pays to use high-quality oscillating tool blades. Imperial Blades offers a complete line of oscillating blades for a wide range of materials. If you need to cut concrete, brick, plaster, grout, or any tough porous material, check out these excellent blades from Imperial Blades.

IBOA730 Segment Diamond Grit Blade

The ONE FIT Segment Diamond Grit Blade from Imperial Blades is one tough customer. Accurate and durable, this diamond grit blade allows you to tackle many jobs around the work site. Concrete and brick are no match for its cutting power, and the diamond coating provides a long-lasting and consistent cut. It’s perfect for a bathroom renovation project for grout and tough plaster. ONE FIT technology insures your oscillating multi tool blades are compatible with the vast majority of tool brands. Check out this diamond-powered oscillating blade from Imperial Blades, tougher than anything you can throw at it!

IBOA610-1 Segment Carbide Blade

Get your groove on with the Segment Carbide Oscillating Blade from Imperial Blades. This tough customer is perfect for cutting grooves in concrete, scoring plaster, and removing stubborn grout. It’s accurate, durable, and compatible with hundreds of oscillating multi tool blade formats. A carbide-grit coating provides a long-lasting cutting life with consistent performance.

IBOA640-1 1-1/4" Carbide Grit Blade

This oscillating tool blade is one of my favorite tools in my bag. It’s the ideal tool for a huge range of painful jobs I encounter. Need to get in between broken tiles to remove stubborn grout? This carbide segment is ideal to reach under and into tight spaces. It makes quick work of wood, adhesives, masonry, and thinset. It’s a great blade to keep in your bag, perfect to bail you out and save you time when you need it.



Buying oscillating blades in variety packs? Is it worth it?

Variety packs are often a good way to expand your options while you save on the blade cost. With the Imperial STORM oscillating tool blade variety pack, you can get the best blades in a convenient format. Check out these variety packs available today. Imperial Blades’ oscillating multi tool blades offer quality construction, a long-lasting cutting life, and the best cut in the business. Once you buy a handy variety pack from Imperial Blades, you’ll be amazed just how many ways you can use these fantastic oscillating multi tool blades.


The 3-piece variety pack has three great oscillating multi tool blades that you can use all over the job site. The IBOAT340 is perfect for wood, metal, and bi-metal. The powerful IBOAT336 makes quick work of tough materials like nail-embedded wood and bi-metal material. The IBOAT330 is a perfect oscillating blade to keep in your tool bag for quick jobs and tough cuts with its' longer plunge depth. Imperial Blades makes it easy to purchase all three blades in a three-pack.


The 6-piece variety pack offers double the blades and a handy carrying case to protect and organize your oscillating tool blades. The IBOAT340 can easily cut through wood, metal, and bi-metal for many projects and applications. The IBOAT336 offers a clean and accurate cut. If you want a tough and reliable oscillating blade, this is a great addition to your toolbox. The IBOAT330 has titanium-enhanced construction for a long-lasting cutting life, perfect for wood, nails, PVC, or drywall. Deck screws are no match for this tough and reliable oscillating multi tool blade from Imperial Blades. 

Keep in mind too, that all One-Fit Oscillating Blade purchases come with a free bonus gift - which is automatically added to your shipment. No coupon code required.


Top 3 Oscillating Blades for Wood Cutting with your Multi Tool

Top 3 Oscillating Blades for Wood Cutting with your Multi Tool

We all love our multi tools – they are one of the most versatile clutch performers in your toolbox. The key thing to remember is to use the right blade for the job at hand. It’s often tempting to just use whatever oscillating blade you left in the bag, but it goes without saying that you should always use the right tool for the job, even a quick one.

Here are the top three oscillating blades to use for wood cutting at home or on the job site.

IBOA200 Coarse Tooth Oscillating Blade

A coarse cutting blade is perfect for cutting any soft material (wood, plaster, drywall, etc.). The Imperial Blades IBOA200 oscillating multi tool blades feature Universal OneFit® and titanium coating to deliver maximum performance and usability. These American-made oscillating blades make it easy to do flush cuts under doors or wherever you need a reliable wood-cutting oscillating blade.

oscillating blades

IBOA270 Japanese Fine Tooth Wide Cut Oscillating Blade

Finish carpentry is a precise discipline, and the work demands the accuracy of a fine tooth saw blade. Using extremely sharp teeth with a J-tooth design, these Japanese-style oscillating blades make the smoothest and most accurate cuts of any oscillating multi tool blade on the market. With modern technology like high-carbon steel and OneFit® to ensure a proper fit on every tool, the IBOA270 oscillating tool blades are the perfect mix of old and new ideas.

oscillating blades

IBOAT336 Wood Cutting Blade (With Nail Cutting Capabilities)

There’s nothing worse than breaking your favorite wood-cutting blade on a pesky nail. It’s a dangerous and frustrating situation that you can easily avoid with the trusty IBOAT336 Wood Cutting Blade with Nail-Cutting Action! These long-lasting blades will easily defeat embedded nails and stripping up to 5/32 inch material. Whether you are renovating at home or working on the job, the IBOAT336 is an indispensable addition to your oscillating multi tool blade kit.

Save money on these blades and more with the coupon code IBEDIRECT at the checkout.

Keywords: oscillating blades, oscillating blade, oscillating multi tool blades, imperial blades, oscillating tool blades